HooD Posted May 5, 2005 Report Share Posted May 5, 2005 Im doing the rudder allignment of my maricat 4.3 rudders this weekend, how much toe in is standard on these boats?? (the poor thing is toed out at the moment!) Cheers Darren. Link to comment Share on other sites More sharing options...
ZAX Posted May 5, 2005 Report Share Posted May 5, 2005 I prefer to run mine parallel but most seem to have 5 to 10mm toe in. Well, better to be at least slightly toed in than toed out. many are getting away from the rubber fittings on the crossbar and using solid fittings from the nacra or others. This is allowed and seems to work well. If you have the rubber fittings there is not really much point trying to get too accurate on the rudder alignment. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.