Jump to content

Information wanted to help find leak in boat


Dudman

Recommended Posts

i normally tape over one bulkhead cover... if you have more than one per hull, put the other lid on properly. then cut a small hole in the tape and stick a vaccuum cleaner hose in that hole, switch the vaccuum cleaner to "blow" such that it creates a positive pressure in the hull. be careful not to put much in there.. and im talking at most about 2psi. then get some detergent and water in a spray bottle, start spraying around all over the hull.. start with any fittings or suspect places first, the air leaking should create bubbles in the detergent ao that you can identify them easier

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...