rrac Posted September 11, 2013 Report Share Posted September 11, 2013 Hi allNew to forum, heap of good info.I and looking for a set of beach rollers suit mari 4.3,(can modify) located shoalhaven area.Any help appreciated, please call jim 014963860zeroThanks Link to comment Share on other sites More sharing options...
knobblyoldjimbo Posted September 12, 2013 Report Share Posted September 12, 2013 One of the guys at the Brass Monkey had got i) pair of wheels from Bunnings - remove the bearings inside and drill/file/remove the flanges. ii) get ally tube to fit, make sure its thick enough to carry the load iii) get two T section sewer pipe fittings, cut the top off the T to make a cradle and put some sort of foam on iv) bolt the downpipe onto the cross tube. Not sure how much the ally tube is but the wheels are about $30 each and the T's not too much. Otherwise look on Gumtree, they come up from time to time. They are rare as hen's teeth. Alternatively if you only have a short distance to pull the boat, get a length of 4x2 treate pine and use it as a skid. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.