Lenny Posted February 7, 2006 Report Share Posted February 7, 2006 I cannot get the sail down without tipping the boat and undoing it ( late 80s model). Any tips? Link to comment Share on other sites More sharing options...
REV YUKKA II Posted February 7, 2006 Report Share Posted February 7, 2006 have you tried rotating the mast in line with the main beam. ie have boat facing directly into the wind, pull sail up then rotate mast left or right (one way will work the other may not)then to let sail down you put pressure on the bottom of the sail (as if you pulling it down then let the mast go an hey presto you should be un hooked. a bit of sail lube up the track of the mast before rigging is a good idea as well. try to avoid tipping the boat over as much as possible. it always seem to be a good way of putting hole in the side of boat or breaking tiller arms. hope this helps REV YUKKA II Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.