Smits Posted June 6, 2006 Report Share Posted June 6, 2006 Hi all, I have an older cat ( prindle 15) and plan to take it apart over winter, repairs etc. When I bolt the beams back on to the hulls should I use any kind of sealant, epoxy etc. From what I can tell some water may be entering around this area so It may assist in reducing this. any advice or comments would be appreciated Peter Link to comment Share on other sites More sharing options...
xmatelot Posted June 6, 2006 Report Share Posted June 6, 2006 hi peter, dont use epoxy or other hardening agents.Just some grease in the bolt holes, and a silicon type sealant around the beam wells. ph 07 32714944, talk to the guys at the Brisbane Catamaran Centre, they build Prindles pete Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.