Dusette Posted June 15, 2017 Report Share Posted June 15, 2017 Purchased a tiller cross arm part to replace one broken by previous owner. Purchased Nacra replacement part form a Nacra parts dealer and part is supposed to fit any F18 but is not long enough and compared to another boat on the beach is short by about 10 cm. Big problem. Does anyone know if Nacra made two different length tiller cross arms? The one I bought is 181.5 cm for the tube portion (not counting the rubber end pieces) and the one I measured on another boat measured 192.5. Thanks in advance for any input. Link to comment Share on other sites More sharing options...
Dusette Posted June 15, 2017 Author Report Share Posted June 15, 2017 Add - the boat is a 2006 F18. Link to comment Share on other sites More sharing options...
Dusette Posted June 15, 2017 Author Report Share Posted June 15, 2017 Last Add - Research is showing the part I bought is likely for the newer boats AND parts for the older boats do not exist. Therefore, anyone know the correct length and inner diameter for the 2006 F18 tiller cross arm tube? I may have to buy a piece of aluminum tubing and make one. Thanks again for any assistance. Link to comment Share on other sites More sharing options...
nacra-maricat australia Posted July 6, 2017 Report Share Posted July 6, 2017 Hi is it an infusion of the F-18 model beforehand?? We have both parts here in stock. Give us a call on 07 3375 4911 Regards Warren Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.