SEVENSEAS Posted February 11, 2011 Report Share Posted February 11, 2011 where is the best position for mask rake on a 5.8 Link to comment Share on other sites More sharing options...
popey Posted February 11, 2011 Report Share Posted February 11, 2011 Check out www.goosemarine.com.au he has some great tuning guides for 5.8's, 16 sq, F18's. They are under the article section Link to comment Share on other sites More sharing options...
Emmessee Posted February 11, 2011 Report Share Posted February 11, 2011 BACK. Have the top of the mast about a metre or less above the rear beam. The stronger the wind the more rake. Do not be shy. Link to comment Share on other sites More sharing options...
SEVENSEAS Posted February 11, 2011 Author Report Share Posted February 11, 2011 thanks will do! Link to comment Share on other sites More sharing options...
yarra bay Posted February 14, 2011 Report Share Posted February 14, 2011 take trape wire with enough rope to messure to where the foil conects to the hull. then hold the rope at where it touches at this point and take it to the rear inspection hole it should be in the middle of the cap for 20+ knotes and at the front for any thing blow that depending on your weight Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.