doomadgeedynamites Posted January 14, 2012 Report Share Posted January 14, 2012 Hi all, I am chasing some info on wether anybody has had any luck making a dolphin striker on a standard H14 for a trap Would a mast spreader fixed to the cross beam with wire running through fixed to each frame base with adjustable loop bolts be sufficent ? Or is it easier to buy a kit any suggestions, photos or directions would be helpful mark Link to comment Share on other sites More sharing options...
Dr Peter Posted January 19, 2012 Report Share Posted January 19, 2012 Mark, My dolphin striker on my Mark 1 Maricat just broke off at the end. I riveted and bolted a piece of aluminium to the base (attached to the beam) and it has survived two seasons. I milled and ground the blank to get a snug fit. Peter Link to comment Share on other sites More sharing options...
Dr Peter Posted January 19, 2012 Report Share Posted January 19, 2012 Mark, My dolphin striker on my Mark 1 Maricat just broke off at the end. I riveted and bolted a piece of aluminium to the base (attached to the beam) and it has survived two seasons. I milled and ground the blank to get a snug fit. Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.