yachtie2611 Posted September 10, 2012 Report Share Posted September 10, 2012 Can anybody please put on a pic of a righting line setup on a mari 4.3 or a description (if possible). i have 4 stainless rings and 8mm rope and 8mm shockcord. hope this is enough ,any info would help. Link to comment Share on other sites More sharing options...
darcy1945 Posted September 10, 2012 Report Share Posted September 10, 2012 Very few people use the original setup, 3/4m of 8mm tied to the dolphin striker support stored in the tramp pocket until required, thrown over the high hull when required (More leverage than pulling from the inside of the hull as does the original system) Link to comment Share on other sites More sharing options...
Pointed Reply Posted September 10, 2012 Report Share Posted September 10, 2012 But..........if you really want top set it up the old way attached are a series of photos from Helter Skelter Link to comment Share on other sites More sharing options...
yachtie2611 Posted September 11, 2012 Author Report Share Posted September 11, 2012 thanks guys , that should help a lot . buy the way there are a few mari's going to lake cairncurrun (vic) for their november regatta. Link to comment Share on other sites More sharing options...
Pointed Reply Posted September 11, 2012 Report Share Posted September 11, 2012 You should post the CCSC regatta on the "Regatta" sections so others get to know about it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.