Matt15 Posted May 2, 2013 Report Share Posted May 2, 2013 Not sure how important this is but reading different bits and pieces online there are several different ways the boom outhaul can be setup on the H16. Any ideas or tips with this one for best use/practice? Nothing was setup upon purchase for either so i've recently bought a downhaul kit but the outhaul has me scratching my head. I've read there are several options avaliable the standard one is to run the main inside the boom track with a simple rope tied to main end, attached to a pully and then using the v-cleat on the underside of boom??? Doesn't seem to practical to me or am I over exaggerating? Link to comment Share on other sites More sharing options...
dave202 Posted May 3, 2013 Report Share Posted May 3, 2013 the standard one is to run the main inside the boom track with a simple rope tied to main end, attached to a pully and then using the v-cleat on the underside of boom??? Doesn't seem to practical to me or am I over exaggerating? Here's how mine works [ATTACH=CONFIG]1354[/ATTACH] hope this helps DAVE Link to comment Share on other sites More sharing options...
Matt15 Posted June 20, 2013 Author Report Share Posted June 20, 2013 Hi Dave, Another reply I've missed, sorry mate. Thank you for your response and pic that covers it well. Looks like I'm over evaluating it. I have setup something very simular but added a single block to give more pull. Cheers again, Matt Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.